GE Industrial Solutions Entellisys System Administrator Manual - Manual (Page 49)

Part II – Replacing the CPU 49
12
• The CPU Option String file dialog box opens. Select the CPU Option String obtained from GE
for the CPU being replaced:
Figure 12-8 Browse CPU Option String File dialog box
• After selecting the option string, the Step 3 – Set Default IP dialog box will display as shown
below. This will change the configured address within the HMI to the default address of a
new CPU in preparation for communicating with it in Step 4.
NOTE: If the IP Address of the CPU has already been set to the default IP address, select Skip
This Task and click Next. Otherwise, click Next. The current IP configuration will be stored
before it is changed.