GE Industrial Solutions Entellisys System Administrator Manual - Manual (Page 57)

Viewing and updating circuit breaker accessories 57
13
To view or change the circuit breaker accessories
1. On the Main Menu, click the Maintenance button. The button will only be displayed if access
is allowed with the current login permissions.
2. Click the Accessories tab. A table will display as shown as in Figure 13-2.
Figure 13-2 Breaker Accessories screen
• Breaker Name: Unique name given to a circuit breaker.
• Electric Operated: Accessory allows the circuit breaker to be opened, closed, and charged
remotely. The check box should be selected if this accessory is present.
• LockOut: Circuit breaker contains either a bell alarm lockout accessory to prevent reclosing
after tripping, or a network interlock accessory to prevent closing during automatic throw
over. The check box should be selected if this accessory is present.
• Position Switch: Circuit breaker contains an accessory that provides remote monitoring of
the position of the circuit breaker during rack-in and rack-out. The check box should be
selected if this accessory is present.
3. Click the Save button to keep changes (or click Cancel to exit the screen without saving).