GE Industrial Solutions Entellisys System Administrator Manual - Manual (Page 53)

Part II – Replacing the CPU 53
12
• The option string will be written to the CPUs, after which they will automatically reboot. After
the reboot is complete, the dialog box for Step 7 will display to update the settings to the
new unit. The option to skip the task is available if this has already been done.
Figure 12-14 Step 7 – Copy Setting dialog box
• Finally, the dialog box for Step 8 will display. Commissioning the new CPU will activate all of
the relaying and protection algorithms in the unit. Click the Finish button to complete the
process.
Figure 12-15 Step 8 – Set CPU Commission dialog box