Grizzly G0501 - Manual (Page 46)

-44- G0501 Sliding Table Saw
Figure 73. Correct rip fence position when per-
forming crosscutting operations.
6. Position the blade guard to the correct height
for your workpiece.
7. Once all the necessary safety precautions
have been taken, perform the cutting opera-
tion.
Figure 74. Example of miter cutting operation
for a cut length less than 45".
Figure 75. Example of miter cutting operation
for a cut length over 45".
The miter fence allows miter cuts from 30˚
through 135˚ on boards ranging in length from
9
1 ⁄
2
" through 86 1 ⁄
2
". The table mounted miter scale
has a resolution of 1 ⁄
2
˚. Either end of the flip stop
slide can be slid into the end of the miter fence to
accommodate cut off lengths both over and under
45" as shown in Figure 74 & 75.
Miter Cutting