Identification – Grizzly G0651 User Manual
Page 11
model g0651/g0652 (mfg. since 1/10)
-9-
Identification
A. Front rail tube
B. Front rail
c. miter gauge
D. Blade guard and spreader
E. outfeed table
F. Fence scale indicator
G. Fence
h. Front (main) extension table
I. rear rail
J. support leg
K. lower shelf
L. Fence lock handle
M. arbor Wrench
N. Blade tilt handwheel & lock
O. Blade angle digital readout
p. Blade tilt scale
Q. Blade height handwheel
R. motor Cover
S. on/oFF switch w/emergency stop
paddle
T. switch disabling lock
Figure 1. g0651 identification.
e
F
g
h
K
l
m
n
o
p
Q
r
s
t
a B
C
d
i
J
For your Own Safety Read Instruction
Manual Before Operating Saw
a) Wear eye protection.
b) use saw-blade guard and spreader for
every operation for which it can be used,
including all through sawing.
c) Keep hands out of the line of saw blade.
d) use a push-stick when required.
e) pay particular attention to instructions
on reducing risk of kickback.
f) Do not perform any operation freehand.
g) Never reach around or over saw blade.