GE DECT 28821 - Manual (Page 36)

6
Last Number Redial
You may redial a number up to 5 digits long. To quickly redial the last number you
dialed:
1. Press the TALK or SPEAKER button.
. Press the redial/format button.
-OR-
. Press the redial/format button first, then use the CALLER ID-VOLUME ( 6 or 5)
button to select the desired redial number.
- Press the CALLER ID-VOLUME ( 5) to review the oldest call and scroll toward the
most recent calls (higher numbers).
- Press the CALLER ID-VOLUME ( 6 ) to review the newest call and scroll to older
calls (lower numbers).
NOTE: You may choose from three last dialed numbers.
. Press the TALK or SPEAKER button. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the redial/format
button to quickly redial the number.
Exit
Press the END/cancel button to exit a menu function and return to the standby
screen.
Page
The page feature helps you locate a misplaced handset. To send and receive
pages, all handsets must be registered. If your handset is not registered, follow the
instructions in the Registration section of this manual.
Handset to Handset Paging
(applicable only with additional handsets)
1. Make sure the phone is OFF (not in TALK mode).
. Press and release the delete/intercom/conf button on a handset. PAGING
EXTENSION? shows in the display.
. Use the touch-tone pad to enter the handset number you want to page.