GE DECT 28821 - Manual (Page 46)

6
. Press the delete button, the current message is erased, and the next
message plays.
To erase all previously played Messages in a mailbox
1. Make sure the phone is
OFF (not in TALK mode)
. Press and hold the delete button until “ ALL OLD MESSAGES ERASED” is
announced.
To erase a message from the handset :
1. Press the mute/menu OK button to go to the main menu.
. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to
ANSWERER.
. Press the mute/menu OK button to enter the menu, press the CALLER ID-VOLUME (
6 or 5) to select HANDSET ACCESS submenu.
. Press the mute/menu OK button to access the answering system. ANSWERER
REMOTE ACCESS shows on the display.
5. Press the play/stop (key ) on the handset.
6. Press the erase (key 0) on the handset to erase a message during playback.
NOTE: Erased messages cannot be restored.
Remote Access
You may access the answering system with the cordless handset or from any tone-
dial compatible telephone.
Cordless Handset
Use the corresponding handset keys just like you would use the base buttons (see
“Answering System Setup”). The button functions are located on the handset above
each number key. For example, to play messages:
1. Press the mute/menu OK button to go to the main menu.
. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to
ANSWERER.
. Press the mute/menu OK button to enter the menu, press the CALLER ID-VOLUME
( 6 or 5) to select HANDSET ACCESS submenu.
. Press the mute/menu OK button to access the answering system. ANSWERER
REMOTE ACCESS shows on the display.
• Press the PLAY/STOP button to play the message.
• When you are finished listening to your messages, press the END/cancel button to
exit.