Grizzly G0514X - Manual (Page 21)

G0514X/-X2/-X2B/-X3 (Mfg. Since 2/12)
-19-
floor Load
refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
some residential floors may require additional
reinforcement to support both the machine and
operator.
placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. see
figure 18 for the mini-
mum working clearances.
children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Site considerations
the unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. remove
this protective coating with a solvent cleaner or
degreaser. For thorough cleaning, some parts
must be removed.
for optimum performance,
clean all moving parts or sliding contact sur-
faces. avoid chlorine-based solvents, such as
acetone or brake parts cleaner that may damage
painted surfaces. always follow the manufactur-
er’s instructions when using any type of cleaning
product.
clean up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
figure 18. Minimum working clearances.
36"
32"