Grizzly G0514X - Manual (Page 39)

G0514X/-X2/-X2B/-X3 (Mfg. Since 2/12)
-37-
SEcTION 4: OpERATIONS
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy REc-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Basic controls
refer to figures 62–66 and the following descrip-
tions to become familiar with the basic controls
and components of your bandsaw.
power Switch: disables the on and oFF button
when the key is turned to the "0" position. enables
on and oFF button when key is turned to "1".
Switch Disabling Key: disables the power switch
and can be removed from the machine. locking
the switch in this manner can prevent unauthor-
ized operation of the machine, which is especially
important if the machine is not stored inside an
access-restricted building
IMpORTANT: Locking the power switch with the
key only restricts its function. It is not a substitute
for disconnecting power from the machine when
adjusting or servicing.
ON Button: starts motor only if the oFF button
is popped out and power switch key is turn to "1"
position.
Off Button: disables the on button. enable the
on button by twisting the oFF button until it pops
out.
figure 62. Control panel features.
power switch
Key
on Button
off Button