GE IM4A - Manual (Page 24)

24
Installation Instructions
REMOVE THE COVER
Remove the screws holding the left side
of the compressor cover and save them for
reinstallation later. Bend the cover back to
access the compartment.
1
BEFORE YOU BEGIN
Read each step thoroughly before proceeding.
•
CAUTION –
Unplug
the Refrigerator. To eliminate
the danger of electric shock during
installation, you must unplug the
refrigerator from its electrical outlet.
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS P
Are these the right instructions for your model? Follow the Installation Instructions indicated by
the label on the back of the refrigerator —
or S R Q P N M L
Flat blade and Phillips
screwdrivers
Pliers
TOOLS YOU WILL NEED
Sharp knife
1/4 ″ and 5/16″ Nutdrivers
2
10
• Fasten the water valve to the cabinet by
inserting the bracket hook on the left inner
side of the compressor compartment. Drive
the hex-head screw (10) from the kit through
the hole in the bracket into the hole on the cabinet.
B
3
ATTACH THE WATER VALVE
• Locate the female connector plug (B). Plug
the female connector (B) onto the male terminals
on the water valve (3). Either wire can go on either
terminal.