GE IM4A - Manual (Page 27)

27
Installation Instructions
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the icemaker
power cord plug into the socket on the rear wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping the restraints onto each side
of the plug. Make sure the restraints click into place.
Make sure the power cord is still in the hook on
the back of the icemaker.
5
MOUNT THE ICEMAKER
• Lift the icemaker so the fill tube (13) fits in
the fill cup opening (E). Hang the icemaker
on the two mounting screws (C).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (13) extends into the fill cup opening
on the back of the icemaker. (Check the rear of
the refrigerator to make sure the fill tube has not
been pushed out of the back of the refrigerator).
• The icemaker mounting screws are located in
the uppermost position of the mounting slots.
• The icemaker is level.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
6
13
E
C
INSTALL THE ICE BUCKET
Put the ice bucket (9) under the icemaker.
Make sure the icemaker power switch is set to OFF.
7
ATTACH WARRANTY LABEL
A label (7) is provided with this kit to record the date of
installation for warranty purposes. Apply it to the back
of the refrigerator.
8
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner’s Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
9
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted) (15)
into the icemaker as shown.
4
15
9
Hook