Grizzly Jointer/ G0634Z - Manual (Page 35)

G0633/G0634 Jointer/Planer Combo Machine
-17-
Moving & Placing
Base Unit
The Model G0633/G0634 is
a heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment to move
the shipping crate and
remove the machine from
the crate.
Figure 10. Left rear lifting hole location.
Figure 9. Front and right rear lifting hole
locations.
You can also attach hooks and lifting straps to
the machine using the three lifting holes shown
in
Figures 9 & 10 with a forklift, hoist, or boom
crane. If you choose this alternative, you must
punch out the lifting strap holes—this will perma-
nently alter your machine.
If you are unsure how to lift this machine, consult
a qualified professional.
After setting the machine in place, remove the
shipping brackets on both sides (
Figure 9).
Unbolt the jointer/planer from the pallet, and use
a forklift to lift the machine off the pallet and onto
a suitable location as shown in
Figure 8. Only lift
the machine enough to clear the floor.
Figure 8. Lifting model G0633 with a forklift.
Brackets