Genie S-85 - Manual (Page 2)

Genie S-80 & Genie S-85 Part No. 43650
Operator's Manual Second Edition· Fifth Printing
Copyright © 1994 by Genie Industries
First Edition: First Printing, August 1994
Second Printing, February 1995
Third Printing, March 1996
Fourth Printing, September 1996
Fifth Printing, October 1996
Second Edition: First Printing, November 1996
Second Printing, March 1997
Third Printing, March 1998
Fourth Printing, August 1999
Fifth Printing, July 2000
"Genie" is a registered trademark of
Genie Industries in the U.S.A. and many other
countries. "S" is a trademark of Genie Industries.
These machines comply with
ANSI/SIA 92.5-1992.
Printed on recycled paper
Printed in U.S.A.
®
Important
Read, understand and obey these safety rules and
operating instructions before operating this machine.
Only trained and authorized personnel shall be
permitted to operate this machine. This manual
should be considered a permanent part of your
machine and should remain with the machine at all
times. If you have any questions, call Genie Industries.
Contents
Page
Safety Rules .............................................................. 1
Controls ..................................................................... 7
Pre-operation Inspection ........................................... 10
Maintenance ............................................................. 12
Function Tests .......................................................... 16
Work Place Inspection .............................................. 22
Operating Instructions ............................................... 23
Transport Instructions ............................................... 27
Decals ...................................................................... 28
Specifications ........................................................... 30
Contact us:
Internet: http://www.genielift.com
e-mail: [email protected]