Genie S-85 - Manual (Page 23)

Part No. 43650 Genie S-80 & Genie S-85 21
Operator's Manual Second Edition · Fifth Printing
Test Auxiliary Controls
65 Shut off the engine.
66 Pull out the red Emergency Stop button to
the ON position.
67 Move the lift/drive select switch to the lift
position (if equipped).
68 Press down the foot switch.
69 Simultaneously hold auxiliary power switch on
and activate each function control handle or
toggle switch.
Note: To conserve battery power, test each
function through a partial cycle.
Result: All boom and steer functions should
operate. Drive functions should not operate with
auxiliary power.
FUNCTION TESTS
Test the Lift/Drive Select Switch (if
equipped)
70 Move the lift/drive select switch to the lift
position.
71 Press down the foot switch.
72 Move the drive control handle off center.
Result: No drive functions should operate.
73 Activate each boom function toggle switch.
Result: All boom functions should operate.
74 Move the lift/drive select switch to the drive
position.
75 Press down the foot switch.
76 Activate each boom function toggle switch.
Result: No boom functions should operate.
77 Move the drive control handle off center.
Result: The drive functions should operate.