Genie S-85 - Manual (Page 26)

24 Genie S-80 & Genie S-85 Part No. 43650
Operator's Manual Second Edition· Fifth Printing
OPERATING INSTRUCTIONS
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to
the ON position.
3 Gasoline/LPG models: Choose fuel by moving
fuel select switch to desired position.
4 Start the engine.
To Position Platform
1 Extend the axles.
2 Hold the function enable switch to either side.
3 Move the appropriate toggle switch according
to markings on the control panel.
Drive and steer functions are not available from
the ground controls.
Machines equipped with Platform Level Control
Disable Function: The platform level toggle switch
will not operate when the boom is raised or
extended past the drive speed limit switches.
Auxiliary Controls
Use auxiliary power if the primary power source
(engine) fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
ON
position.
3 Move the lift/drive select switch to the lift
position (if equipped) when operating the
auxiliary controls from the platform.
4 Press down the foot switch when operating the
auxiliary controls from the platform.
5 Simultaneously hold auxiliary power switch ON
and activate desired function.
The drive function will not operate with auxiliary
power.
Extendable Axles
Be sure the machine is on a firm, level surface.
Use shoring material under the jack foot pad as
required.
1 Push and hold the jack control handle to
extend the jack. Do not release handle.
2 Push the axle control handle to extend the
axle. Pull the axle control handle to retract the
axle.
3 Release the handles when the axle is fully
extended or retracted.
4 Pull the jack control handle to retract the jack.
5 Repeat for other axle.