Fall hazards, Bodily injury hazard – Genie S-85 User Manual

Page 6

Advertising
background image

4

Genie S-80 & Genie S-85

Part No. 43650

Operator's Manual

Second Edition· Fifth Printing

Do not place or attach overhanging loads to any
part of this machine.

Do not place ladders or scaffolds in platform or
against any part of this machine.

Do not use machine on a moving or mobile surface
or vehicle.

Be sure all tires are in good condition, air-filled tires
are properly inflated and lug nuts are properly
tightened.

Models with 750 lb (340 kg) Capacity: Do not
use air-filled tires. Models are equipped with foam-
filled tires. The wheel weight and the proper
counterweight configuration are critical for machine
stability.

Do not use the platform controls to free a platform
that is caught, snagged or otherwise prevented
from normal motion by an adjacent structure. All
personnel must be removed from the platform
before attempting to free the platform using the
ground controls.

Fall Hazards

Occupants must wear a
safety belt or harness in
accordance with
governmental regulations.
Attach lanyard to anchor
provided in platform.

Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform floor at
all times.

Do not climb down from the platform when raised.

Keep the platform floor clear of debris.

Lower the platform entry mid-rail or close the entry
gate before operating.

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil or
air leak. An air or hydraulic leak can penetrate
and/or burn skin.

Always operate machine in a well-ventilated area to
avoid carbon monoxide poisoning.

SAFETY RULES

Advertising
This manual is related to the following products: