GE 800-EFM - Manual (Page 13)

Installing Your External Paging Adapter
Step 6: Adjust Speaker Volume to Desired Level
1 Listen to Speaker Volume
At the System phone nearest the External
Paging Adapter, make an announcement
through that external speaker (see page 10 for
instructions on doing this). Listen to the vol-
ume of your announcement through the speak-
er, or ask someone else to make the
announcement while you listen to the volume
level.
2 Adjust the Volume of the Speaker
Use the volume control knob on the amplifier to
achieve your desired speaker volume. Note
that if your speaker has a built-in amplifier, the
volume control knob may be on the speaker
itself.
3 If Necessary, use the Feature
Module’s Volume Control Knob
If you find that you cannot achieve the desired
volume level by adjusting the volume of the
amplifier (or self-amplified speaker), then use
the paging volume control on the rear of the
Feature Module. Using a small screw driver,
turn the knob in a clockwise direction to
increase the volume level, or counter-clock-
wise to decrease the volume.
Note: This paging volume control on the mod-
ule is only active when the amplifier is con-
nected to the blue and black terminals.
Amplifier
Volume
7
800-EFM guide for PDF v1 091102.qxd 9/11/2002 2:40 PM Page 14