GE 800-EFM - Manual (Page 20)

Installing Your Door Intercom Adapter
Step 2: Set DIP Switches to Proper Positions
15
Set Switches 7-8
Set switch 7 in the down position and
switch 8 in the up position to set this fea-
ture module as a Door Intercom Adapter.
Set Switches 5-6 (Optional)
The setting of these DIP switches deter-
mines how many seconds the magnetic
door strike will remain unlocked when you
unlock it from one of your system phones.
You may choose either 2 seconds, 5 sec-
onds, 10 seconds, or 15 seconds.
Note that you only need to be concerned
with this setting if you plan to connect a
magnetic door strike to this Door Intercom
Adapter.
Set Switches 1-4
The setting of these four DIP switches
determines what station number your
Door Intercom Adapter will be set as.
You may choose to set this Door Intercom
Adapter as either station #23, #24, #25, or
#26.
IMPORTANT: Make
sure that switch 7 is
set in the down posi-
tion and switch 8 is set
in the up position.
Stn 23
Stn 24
Stn 25
Stn 26
15 seconds
10 seconds
5 seconds
2 seconds
800-EFM guide for PDF v1 091102.qxd 9/11/2002 2:40 PM Page 26