GE 800-EFM - Manual (Page 25)

Installing Your Door Intercom Adapter
Step 7: Connect Magnetic Door Strike to Wiring Block (Optional)
1 Install Magnetic Door Strike
Please follow the installation instructions that
came with your magnetic door strike.
Note that TMC Corporation does not manufac-
ture magnetic door strikes. The Door Intercom
Adapter has been designed and tested to be
compatible with industry standard magnetic
door strikes, which are also called magnetic
door locks. Nutone is one example of a com-
pany that supplies magnetic door strikes.
2 Connect Magnetic Strike Wires to 12-
Volt Supply and to Wiring Block
Connect one magnetic strike wire to one of the
indicated screw terminals on the wiring block.
Note that these are the terminals with the yel-
low wire and the green wire.
Connect the other magnetic strike wire to one
terminal of a 12-volt DC power supply, which
you must provide.
Last, connect a wire from the other terminal of
the 12-volt power supply to the other indicated
screw terminal on the wiring block.
PLEASE NOTE THAT YOU MUST CONNECT
A 12-VOLT POWER SUPPLY IN ORDER FOR
YOUR MAGNETIC DOOR STRIKE TO FUNC-
TION. Please consult the instructions that
came with your magnetic door strike for exact
power specifications and amperage require-
ments.
12-volt DC power supply
20
800-EFM guide for PDF v1 091102.qxd 9/11/2002 2:40 PM Page 31