Grizzly G0695 - Manual (Page 14)

-12-
model g0695 (mfg. since 9/10)
Inventory
the following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (figure 3) Qty
A. Cap screws m6-1 x 25 ............................... 3
b. handwheel handles ................................... 3
C. hex Wrench 5mm ....................................... 1
D. hex Wrench 4mm ....................................... 1
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SuffOCATION HAzARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
figure 3. model g0695 inventory.
a
B
d
C