Grizzly G0695 - Manual (Page 25)

model g0695 (mfg. since 9/10)
-23-
figure 18. X-axis table locks.
X-axis table
Locks
figure 21. y-axis limit stops and block.
Limit Block
y-axis Limit stops
figure 19. y-axis and z-axis locks.
y-axis Lock
z-axis
Lock
Limit Stops
position the limit stops along the limit stop tracks
to confine the distance the table or saddle can
travel (see
figures 20–21).
Limit Block
figure 20. X-axis limit stops and block.
X-axis Limit
stops
Always keep the table locked in place unless
controlled movement is required for your
operation. unexpected table movement dur-
ing operations could cause the cutter to
bind with the workpiece resulting in damage
to the cutter and workpiece, and possible
personal injury.
Locks
Use the table, saddle, and knee locks shown in
figures 18–19 to secure the table in position.