Grizzly G0695 - Manual (Page 35)

model g0695 (mfg. since 9/10)
-33-
G5684—R-8 Vertical Collet Rack"
no more loose r-8 collets laying around in your
tool box. organize with this handy collet rack and
you won’t be looking at each one for the correct
size. set on your bench or mount to a wall. holds
48 collets.
figure 47. model g5684 tilt table.
G5758—Tilt Table 5" x 7"
set your work at any angle with these sturdy tilt
tables. heavy-duty construction includes t-slots,
two locking screws and precision base that allows
the table to tilt from -45 degrees to +45 degrees.
table size: 5" x 7".
figure 46. model g5758 tilt table.
G5649—5–C Spin Index
Fitted with a traveling spindle and collar, the 5-C
spin index is unmatched for forming, grinding,
and inspecting end mills and other fluted cut-
ting tools. this spin index accepts 5-C collets
up to 1
1 ⁄
8
" capacity and features a 36 hole index-
ing plate with 10 vernier holes for indexing to 1
degree. Locking spindle is hardened and ground
and has 2
1 ⁄
16
" of travel.
figure 48. model g5649 5–C spin index.
G1054—Dividing Head-bS-1
these high quality dividing heads are made with
demanding care for precision gear-cutting, sharp-
ening milling cutters, reamers, etc. dividing heads
come complete with 3 dividing plates, 1 tailstock,
1 chuck back plate, 1 center-dog and 1 center.
thread on nose 1
1 ⁄
2
" x 8 tpi. ratio: 40:1
figure 49. model g1054 dividing head - Bs-1.