Grizzly G0613/G0614 - Manual (Page 10)

-8-
G0613/14 Swivel Mast Metal Cutting Bandsaw
Control Panel
A. ON/OFF Push Button Switch: When the
cover is open, it allows access to the normal-
operation ON/OFF pushbutton switch that is
used to start and stop the bandsaw.
B. EMERGENCY Stop and Anti-Start Lockout
Cover: When the cover is closed but not
latched shut, it serves as an easy-to-find
EMERGENCY STOP button with anti-start
lockout. If pushed in an emergency situation,
the cover pushes the OFF button and then
latches shut, preventing accidental machine
startup.
Note: Both bandsaws also have an auto-
matic shut-off (limit switch) that turns the saw
OFF at the completion of the cutting arc.
C. Circuit Breaker: Kills power in the event of
high current draw or motor overload.
D. Cutting Fluid Pump Switch: Turns the cut-
ting fluid pump ON.
Figure 2. G0613 control panel.
C
E. ON Button: Turns the motor ON and starts
the bandsaw.
F. OFF Button: Turns the motor OFF and stops
the bandsaw.
G. Cutting Speed Switch: Changes the motor
speed between 1725 and 3450 RPM, giving
two cutting speeds of 170 and 341 FPM.
H. Cutting Fluid Pump Switch: Turns the cut-
ting fluid pump ON.
I. EMERGENCY STOP/OFF Button: Kills
power to the system and turns the motor
OFF. Twist the button until it pops out to re-
energize the system.
E F
G
Figure 3. G0614 control panel.
A
B
H I
D