Grizzly G0613/G0614 - Manual (Page 22)

-20-
G0613/14 Swivel Mast Metal Cutting Bandsaw
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
This bandsaw is for trained operators only.
WE STRONGLY RECOMMEND that you read
books, trade magazines, and get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Cutting Angle
Your bandsaw has a locking turret with a range of
0° to 60° degrees.
To set the angle of cut:
1. Raise the bow to the highest position and
lock in place ( Figure 12).
3. Move the swivel lock lever to the right to lock
the headstock in place. The cutting angle is
now set.
Figure 12. Feed ON/OFF Valve.
Feed ON/OFF
2. Move the swivel lock lever (Figure 13), to the
left and rotate the headstock until the scale
indicates the angle that you need.
Figure 13. Swivel lock lever.
Lock Unlock