Grizzly G0493 - Manual (Page 49)

Model g0493 (Mfg. since 7/10)
-47-
figure 91. Crosscutting workpieces
using the rip fence as a cut-off gauge.
lastly, this machine has the capability of cross-
cutting workpieces while using the rip fence as a
cut-off gauge (
figure 91).
determine which cutting operation will be best
suited for the workpiece to be crosscut.
— if you will be crosscutting full size panels,
then skip ahead to “Crosscutting Full size
panels.”
— if you will be crosscutting smaller panels,
then skip ahead to “Crosscutting smaller
panels.”
— if you will be crosscutting workpieces using
the rip fence as a cut-off gauge, then skip
ahead to “Crosscutting using rip Fence as
a Cut-off gauge.”
the Model g0493 can crosscut full size panels
with the fence in the forward or rear position,
although it is easier to load full size panels with
the crosscut fence mounted in the forward posi-
tion (see
figure 89).
Mounting the crosscut fence in the rear position
(
figure 90) gives greater stability for crosscutting
smaller panels.
crosscutting
figure 89. Crosscutting full size panel.
Forward Mounted
Crosscut Fence
figure 90. Crosscutting smaller panels.
rear Mounted
Crosscut Fence