Configuring tacacs+ with enervista secure, Web management software -6 – GE MULTILINK ML1200 User Manual
Page 144
Advertising
8–6
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
ACCESS USING TACACS+
CHAPTER 8: ACCESS USING TACACS+
8.3
Configuring TACACS+ with EnerVista Secure Web Management software
Z
To access the TACACS servers, select the Administration > User
Mgmt > TACACS+ menu item.
By default, no TACACS servers are defined.
Z
To add a server, click on the Add button as shown below.
Note that the TCP port field can be left blank – port 49 is used as a default port. Up to five
TACACS+ servers can be defined.
Advertising