GE 21008 - Manual (Page 13)

13
P
ROGRAMMING THE
T
ELEPHONE
S
TANDBY
S
CREEN
The handset displays the handset number and user name.
P
ROGRAMMABLE
F
UNCTIONS
There are eight programmable menus available:
Language, Handset Name, Area Code, Ringer Tone, Tone/Pulse,
Registration, Deregistration, and Default Setting.
L
ANGUAGE
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/program button to go to the SET LANGUAGE menu.
3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or
use the cid/ vol (up or down arrow) button to scroll to the desired
language. (English is the default setting).
4. Press the MUTE/program button to save your selection. You will hear a
confirmation tone.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
H
ANDSET
N
AME
1. Press the MUTE/program button to go to the HANDSET NAME menu.
2. Use the touch-tone pad to enter a name (up to 15 characters). More than
one letter is stored in each of the number keys. For example, to enter Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the
letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for
the second letter L, and press the 1 key to insert a space between the first
and last name. Press the 7 key 4 times for the letter S; press the 6 key once
for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
USER NAME
HANDSET X