GE 21008 - Manual (Page 16)

16
D
E
-R
EGISTRATION
This setting may be made with the handsets only. Deregistration
cancels registration. During the de-registration process, keep the
handset near the base.
1. If necessary, press the MUTE/program button to go to the
DEREGISTRATION menu. The default is 2 NO.
2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the cid/
vol (up and down arrow) button to scroll to 1 YES or 2 NO.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
3. Select NO, if you do not want to deregister.
4. If you select 1 YES, press the MUTE/program button and MOVE NEAR
TO BASE displays for 2 seconds, then CONFIRM? 1 YES 2 NO appears in
the display.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
5. Press the touch-tone pad to select 1 YES or 2 NO, or use the cid/vol (up
and down arrow) button to scroll to 1 YES or 2 NO.
6. If you select YES, press the mute/program button to confirm. DE-
REGISTER ..... shows in the display followed by a confirmation tone.
Then HANDSET X DEREGISTERED shows in the display to confirm the
handset is deregistered.
NOTE: When you complete the deregistration process, HANDSET NEEDS
REGISTRATION shows in the display. To use the handset, you must register
the handset.
G
LOBAL
D
E
-
REGISTRATION
If one or more handsets becomes lost, you should de-register all handsets
to ensure proper system operation. Follow the steps below to deregister
both handsets at the same time.