GE 21008 - Manual (Page 17)

17
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Press and hold the page button on the base until the IN USE/PAGE
indicator on the base flashes.
2. Press and hold the page button on the base again until the IN USE/PAGE
indicator on the base flashes rapidly.
3. Press and release the page button on the base once. All handsets are de-
registered and HANDSET NEEDS REGISTRATION shows in the display.
D
EFAULT
S
ETTING
As you become familiar with this system, you may prefer to use the
system’s original settings. Follow the steps below to return to the factory
default settings.
1. Press the MUTE/program button to go to the DEFAULT SETTING menu.
The default setting is 2 NO.
2. Use the touch-tone pad to select 1 YES or 2 NO, or use the cid/vol (up or
down arrow) button to move the cursor to 1 YES or 2 NO.
NOTE: If you choose “YES” all the settings in the programmable menu are
returned to factory default setting.
3. Press the MUTE/program button to save your selection.
NOTE: Press the EXIT key once to keep the previous setting and return to the
standby screen.
T
ELEPHONE
O
PERATION
C
HARGE
I
NDICATOR
When the charge indicator is lit, the handset is correctly seated in the cradle
and is charging.
M
AKING
C
ALLS
1. Pick up the handset, and press the talk/callback button. Listen for a
dial tone.