GE 21008 - Manual (Page 14)

14
NOTE: If you make a mistake, use the delete/flash button to backspace and
delete one character at a time.
3. Press the MUTE/program button to save your name. You will hear a
confirmation tone.
A
REA
C
ODE
1. Press the MUTE/program button to go to the SET AREA CODE menu.
The default is - - -.
2. Use the touch-tone pad to enter your 3 digit area code.
3. Press the MUTE/program button to save your selection. You will hear a
confirmation tone.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
R
INGER
T
ONE
You may choose from six different ringer tones.
1. Make sure the ringer is turned on. See Ringer On/Off section.
2. Press the MUTE/program button to go to SET RINGER TONE menu.
3. The default ringer tone is set to ringer tone 1.
4. Use the touch-tone pad to enter a ringer tone number (1 through 6) , or use
the cid/vol (up or down arrow) button to scroll to the desired setting. You
will hear a sample of the ringer tone you select.
5. Press the MUTE/program button to save your selection. You will hear a
confirmation tone.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
T
ONE
/P
ULSE
Most telephone systems use tone dialing, however, some may still use
pulse dialing. This system is pre-set to tone dialing. Depending on your
service type, set the dialing mode as follows: