GE 21008 - Manual (Page 18)

18
2. Dial the number you want to call, or dial the number first then press the
talk/callback button.
3. When finished, press the talk/callback button to hang up.
A
NSWERING
C
ALLS
1. When the phone rings, pick up the handset, and press the talk/callback
button.
2. When finished, press talk/callback to hang up.
NOTE: Adjust the handset volume by pressing the cid/vol (up or down arrow)
button during a call.
C
ALL
T
IMER
After you press the talk/callback button on the handset, the built-in call timer
shows on the display and counts the length of time of the call in minutes
and seconds.
P
RE
-D
IALING
1. Make sure the phone is OFF (not in talk mode).
2. Enter the telephone number you want to call. The telephone number
shows in the handset display.
3. Press the talk/callback button on the handset, and the number
automatically dials.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the
FLASH/DELETE button until all of the digits are erased.
A
UTO
S
TANDBY
If you place the handset in the cradle while the handset is off the hook
(during a call), the call is automatically disconnected.
R
INGER
O
N
/O
FF
The handset ringer toggle button is pre-set to ON.