MicroBoards Technology CD Disc-to-Disc Office Copier II - Manual (Page 11)

Orbit II Disc-to-Disc Copier Reference Manual – Revision I
11
5.3 Installing the Orbit II - cont:
Place the Orbit II CD-to-CD Office Copier on the work space with its back panel accessible to you:
Make sure the switch on the external Power Supply is OFF
Insert the DC output connector of the external Power Supply in the rear panel DC receptacle
Connect the external Power Supply to an AC Receptacle, but do not turn it on yet.
Rotate the assembled Orbit II Copy System so its control panel is facing you, and position the Power
Supply as shown in the photograph below.