MicroBoards Technology CD Disc-to-Disc Office Copier II - Manual (Page 29)

Orbit II Disc-to-Disc Copier Reference Manual – Revision I
29
Section 8 Maintenance
8.1 Routine Maintenance:
The Orbit II Stand Alone CD-to-CD Office Copier is designed to provide years of trouble free service
without routine maintenance. The key to long life and reliable operation is to keep the work area, and the
Orbit II, free of dust and debris.
To clean the outside cabinet and plastic panel:
• Turn off Orbit II’s external power supply.
• Use a clean lint free cloth moistened with a weak solution of dishwashing detergent in warm water.
• Dry the unit immediately with a clean lint free cloth.
If debris accumulates within the Orbit II Loader you should gently wipe the affected surfaces with a lint free
cloth, use a small shop vacuum, and/or blow out the contamination with compressed air. Make sure all of
your blank media, masters, and copies are protected while you are cleaning your Orbit II System.