MicroBoards Technology CD Disc-to-Disc Office Copier II - Manual (Page 20)

Orbit II Disc-to-Disc Copier Reference Manual – Revision I
20
Unloading Accepted CD-Rs:
Orbit II accumulates accepted CD-Rs in the Accept Basket located on the left side of the Unit. We
recommend the use of lint free gloves whenever you handle CD-Rs, because fingerprints can affect
recording, playback, and printability. To avoid touching critical surfaces, handle CD-Rs by their inside and
outside edges. You can remove accepted CD-Rs at any time, but do not try to remove them while a disc is
being transferred to the Accept Basket.
Remember; all duplicated, unprinted, CD-Rs may look the same. It is the responsibility of the
operator to keep each duplicated CD-R in the proper group. It is also sometimes difficult to tell
“blank” or un-duplicated CD-Rs from “burned” or duplicated CD-Rs. That is why we recommended
maintaining a consistent and orderly flow of masters and duplicates in your copy area.
Unloading Rejected CD-Rs:
Orbit II was designed to minimize the possibility of mixing rejected CD-Rs with masters or accepted
copies. The Reject Slot is located on the right side of Orbit II. You can access rejects at any time.
We suggest you keep a clearly labeled REJECT container in your production area so rejected
discs do not get mixed with masters or accepted duplicates.