Philips Magnavox CT270MW8 A - Manual (Page 10)

10
EN
P
REPARATION
External Device Connection
[Video Cable Connection]
When you connect this unit to an external device, use the audio/video input jacks on the front of this unit.
Make the connection as illustrated below.
When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack.
camcorder video game
VCR
e.g.)
AUDIO OUT
L R
VIDEO
OUT
RCA audio cable
RCA video cable
front of this unit
• To use the video input jack on the front of this unit, press [SOURCE] on the unit or [SELECT] on the remote control to
select “AUX”.
[Digital Audio Output Connection]
If you connect this unit to an external digital audio device, you can enjoy multi channel audio like 5.1ch digital broad-
casting sound.
Dolby Digital decoder
e.g.)
AUDIO OUT COAXIAL
ANT.
rear of this unit
DIGITAL AUDIO
COAXIAL IN
digital audio coaxial cable
AUDIO OUT
COAXIAL
5
Cables not included.
Please purchase the necessary cables at your local store.
P77B1UT.indd 10 2007/09/21 13:21:30