Philips Magnavox CT270MW8 A - Manual (Page 25)

25
EN
WATCHING TV
OPERATING VCR
OPERATING DVD
INTRODUCTION
PREPARATION
INITIAL SETTING
DVD SETTING
INFORMATION
TROUBLESHOOTING
ESPAÑOL
VCR User Setting
Rental Playback Rental Playback
This function enables you to improve the picture quality when playing back
worn cassettes such as rented tapes.
1
Press [SET-UP] to display the main menu.
2
Use [Cursor K / L] to select “USER’S SETUP“, then press
[ENTER].
e.g.) digital TV mode
or
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SETUP
USER'S SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DTV SETUP
B
3
Use [Cursor K / L] to select “RENTAL”, then press
[ENTER] to select “ON”.
or
--- USER’S SETUP ---
RENTAL [OFF]
REPEAT PLAY
[OFF]
AUTO RETURN [OFF]
4
Press [SET-UP] to exit.
5
Press [PLAY B] to start playback.
RENTAL PLAY B
Note:
• This setting will not change even if you turn off the unit.
• To cancel the setting, select “OFF” at step 3.
Auto Repeat Playback Auto Repeat Playback
This function allows you to repeat playback indefi nitely.
1
Follow steps 1 to 2 in “Rental Playback“ above.
2
Use [Cursor K / L ] to select “REPEAT PLAY”, then press
[ENTER] repeatedly until the desired selection “ALL“ or
“BLANK“ appears.
or
--- USER’S SETUP ---
RENTAL [OFF]
REPEAT PLAY
[OFF]
AUTO RETURN [OFF]
5
ALL
Repeat playback from the beginning to the
end of the tape.
BLANK
Repeat playback from the beginning to a part,
which is blank for more than 10 seconds.
OFF Cancel repeat playback.
3
Press [SET-UP] to exit.
4
Press [PLAY B] to start the repeat playback.
REPEAT PLAY B
Note:
• If the rental mode is set to “ON”, “RENTAL PLAY B” display
has priority.
• This setting will not change even if you turn off the unit.
Auto Return Auto Return
This function allows you to automatically search the beginning of the
recorded program(s) after timer recording fi nishes.
1
Follow steps 1 to 2 in “Rental Playback“ on the left col-
umn.
2
Use [Cursor K / L ] to select “AUTO RETURN”, then
press [ENTER] to select “ON”.
or
--- USER’S SETUP ---
RENTAL [OFF]
REPEAT PLAY
[OFF]
AUTO RETURN [OFF]
3
Press [SET-UP] to exit.
4
When all the timer recordings are completed, the
unit will rewind to the beginning of the recorded
program(s) and then turn itself off.
Note:
• If you turn off the unit while rewinding the tape, the auto
return will stop.
To cancel the auto return mode
Press [ENTER] once again at step 2 until “OFF“ is dis-
played on the TV screen.
•
Even if any power failure occurs, the unit will retain its
memory for this feature.
P77B1UT.indd 25 2007/09/21 13:21:52