Philips Magnavox MRV700VR - Manual (Page 46)

46 VCR Plus+ ® Timer Recording (DVD mode only)
A PlusCode ® number is a number of up to eight digits, printed in most TV
guides next to the start time of a TV program.You can schedule a timer
recording quickly by entering the code for your TV program.
Before you begin, complete the VCR Plus+
® channel setup. See page 29.
● Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1 Press VCR Plus+/TIMER on the remote control.
2 Press K to select VCR Plus+ system, then press B.
3 Press the Number buttons to enter the PlusCode number
from your TV guide, then press OK.
If you make a mistake,
press CLEAR to erase the PlusCode number, then enter it correctly.
Information about the timer will appear. If information is missing or
not available, you may be asked to enter more information. Follow
the instructions on the screen.You may be asked to enter a channel
number if you have not set up VCR Plus+ channels. See page 29.
4 If the timer recording information seems correct and com-
plete, press OK.
Stored will appear at the bottom of the screen
briefly.The Timer menu will reappear.
5 Press VCR Plus+/TIMER to remove the menu.
6 Put a recordable DVD+RW or DVD+R in the Recorder.
Press STANDBY-ON
y y to turn off the Recorder at least
five minutes before the timer recording is set to begin. The
Recorder must be off in order for the timer recording to occur.
If you plan to play a DVD+R on another DVD Player, finalize the Disc.
See page 55.
To edit your recordings, see page 54. However, editing changes may not be
accessible when you play the Disc on other DVD Players.
Timer
K
uB VCR Plus+ system B
L Timer Programming
Timer List
To exit
Press TIMER
Timer
VCR Plus+ system
PlusCode number
- - - - - - - -
Mo-Fr/Weekly To store
Press SELECT Press OK
Timer
VCR Plus+ system
Rec
Date Ch. Start End Mode
10/24 122 09:00AM 09:30AM M1
AM/PM To store
Press SELECT Press OK
• You cannot select VCR Plus+
system if six timer recordings
are set. Delete a recording first.
Helpful Hint
6
2
1,5
3
3,4
E9490UD_EN.qx3 04.8.3 11:55 AM Page 46