72 rerecording (tape duplication) – Philips Magnavox MRV700VR User Manual
Page 72
72 Rerecording (Tape Duplication)
• If you use the AUDIO and VIDEO
IN jacks on the back of Recorder
2, press CHANNEL +/- to select
EXT2 at step 5. EXT2 will
appear on the TV screen.
• If you use the AUDIO and VIDEO
In jacks on the front of Recorder
2, press CHANNEL +/- to select
CAM1 at step 5. CAM1 will
appear on the TV screen.
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright
laws.
• If a program has copyright pro-
tection, it may not record clearly.
Helpful Hints
1
Make the connections shown above.
2
Recorder 1 will play your tape. Put a prerecorded tape into the
cassette compartment of Recorder 1. Press VCR to put the
unit in VCR mode if necessary.
3
Recorder 2 will record your tape. Insert a blank tape in the cas-
sette compartment of Recorder 2. Press VCR to put the unit in
VCR mode if necessary.
4
Turn on the TV and set it to channel 03.
(To use channel 04
instead, see page 10.)
5
Point the remote control at Recorder 2. Press CHANNEL
+/- to select EXT2 or CAM1.
(See Helpful Hints at right.)
6
Press REC SPEED/MODE to select SP or SLP as the tape
recording speed at Recorder 2.
7
Press RECORD
I
(VCR) on the front of Recorder 2 then
press PLAY B (VCR) on the front of Recorder 1.
To stop recording, press STOP C / EJECT A (VCR) on Recorder 1,
then press STOP C / EJECT A (VCR) on Recorder 2.
Recorder 1
Playing unit
Recorder 2
Recording unit
3. RF coaxial cable from the
(Antenna) OUT jack of Recorder
2 to the TV’s ANTENNA IN jack
These instructions show you how to copy videotapes.The illustration uses two Recorders. Other VCRs or Camcorders may oper-
ate differently.
2. Video cable from yellow
VIDEO OUT jack of
Recorder 1 to VIDEO IN
jack of Recorder 2
1. Audio cables from AUDIO OUT jacks (red and white) of
Recorder 1 to AUDIO IN jacks of Recorder 2
E9490UD_EN.qx3 04.8.3 11:55 AM Page 72