Philips Magnavox MRV700VR - Manual (Page 56)

56 Auto Resume, Playback Control
Auto Resume
Auto resume affects the last 20 prerecorded DVDs and Video CDs you
played. When Auto resume is On, play resumes where you last stopped the
Disc. If Auto resume is Off, play starts at the beginning of the Disc.
● Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1 Press SYSTEM MENU. Press s to select in the top left
corner of the menu bar at the top of the TV screen.
2 Press L repeatedly to select in the second screen, then
press B .
3 Press L to select Auto resume, then press B.
4 Press K or L to select On or Off, then press OK.
5 Press SYSTEM MENU to remove the menus.
W X Y Z a
1 2 1en off no off ~
Disc Features
Access Control
Auto resume s On L
Off
Playback Control
Some Video CDs have interactive menus that customize play. If the Video
CD has Playback Control (PBC), follow these steps to turn it on or off.
1 Press SYSTEM MENU. Press s to select in the top left
corner of the Menu Bar at the top of the TV screen.
2 Press L repeatedly to select in the second screen, then
press B.
3 Press L repeatedly to select PBC, then press B. It appears in
the menu only when a Video CD with Playback Control is in the
Recorder.
4 Press K or L to select On or Off, then press OK.
5 Press SYSTEM MENU to remove the menus.
W X Y Z a
1 2 1en off no off ~
Disc Features
Access control
Auto resume
PBC On
Off
s L
• If the resume symbol appears
when you start play, press PLAY
B .This lets you resume play
from the last played point, even
if Auto resume is Off. See page
21.
• The display panel will be blank
during play of a Video CD with
PBC On.
Helpful Hints
1,5
1-4
1,5
1-4
E9490UD_EN.qx3 04.8.3 11:55 AM Page 56