Time search, index search 75 – Philips Magnavox MRV700VR User Manual

Page 75

Advertising
background image

Time Search, Index Search 75

• Time Search and Index Search

are not available during record-
ing.

• To cancel a search, press STOP C.
You can set up to 20 Index

Marks.

Helpful Hints

Time Search

Follow the steps below to search forward or backward on a tape a specific
length of time.There must be a tape in the cassette compartment.

Before you begin, make sure the Recorder is in VCR mode. Press VCR so
the VCR light appears on the front of the Recorder.

1

Press SEARCH MODE until the TIME SEARCH display
appears on the TV screen.

2

Within 30 seconds, enter the desired length of time using
the Number buttons.

For example, enter 0, 0, 3 for 3 minutes.

You can set a Time Search for up to 9 hours and 59 minutes (9:59).

3

Within 30 seconds, press PREV/REW

H

(for a reverse

search) or NEXT/FF G (for a forward search).The VCR begins
rewinding or fast forwarding the tape.When the tape finishes
rewinding or fast forwarding the time you specified, playback will
begin.
The time will count down beneath TIME SEARCH during the search.
If the beginning or end of the tape is reached before the search is
complete, the search will stop.

Index Search

An Index Mark is made automatically at the beginning of each recording.
Essentially, an Index Mark is a “bookmark.” Find the start of a recording by
following these steps.

1

Press VCR, then press SEARCH MODE until the INDEX
SEARCH display appears on the TV screen.

2

Within 30 seconds, enter the number of programs you want
to skip using the Number buttons.

For a single digit number,

press 0 first. For example, enter 0, 3 for the third Index Mark. The
number you enter appears beneath INDEX SEARCH. Include the
current program in your number.

3

Within 30 seconds, press PREV/REW

H

(for a reverse

search) or NEXT/FF G (for a forward search).When the tape
finishes rewinding or forwarding, playback will start.The program
numbers will count down beneath INDEX SEARCH during the
search.
If the beginning or end of the tape is reached before the search is
complete, the search will stop.
Recordings should be at least one minute long in SP speed, two min-
utes in LP, and three minutes in SLP. Otherwise, the Index Mark will
not be available. Details on tape recording speeds are on page 79.

TIME SEARCH

- : - -

INDEX SEARCH

_ _

1

2

3

1

1

2

3

E9490UD_EN.qx3 04.8.3 11:55 AM Page 75

Advertising