Philips Magnavox MRV700VR - Manual (Page 89)

1 Remove the Antenna or Cable TV signal from your TV.
Connect it to the ANTENNA IN jack at the rear of the
Recorder.
2 Connect the supplied RF coaxial cable to the (Antenna)
OUT jack on the Recorder and to your TV’s ANTENNA
IN or RF INPUT jack.
3 Connect the Recorder’s power cord to a power outlet.
MRV700VR
S M A R T . V E R Y S M A R T . - -
First connect ...
Helpful Hint:
If your TV has different connectors, refer to the
TV manual for connection options. Also refer to
the Recorder’s owner’s manual, which details
other TV connection possibilities.
Complete Initial Setup
Initial Setup screens will appear the first time you turn on the
Recorder.
1 Press STANDBY-ON2 2 2 2 2 to turn on the Recorder.
2 Turn on the TV and select channel 3.
NO PICTURE? Make sure the TV is on channel 3 if you used
the simple connection shown in section 1 of this Quick-Use
Guide. To use channel 4 or another Video channel at your TV,
refer to the owner's manual for different connections.
3 The Initial Setup menu will appear.
Use 3 or 4 to choose a setting for each item, then press
OK to confirm.
The following menus will appear:
Menu Language
• English, Español, Français – Select a language for the
Recorder’s menus and on-screen displays.
Audio Language
• English, Español, Français, etc – Select a DVD audio
language.
Subtitle Language
• English, Español, Français, etc – Select the language you
prefer for DVD subtitles.
TV Shape
• 4:3 letterbox Stretch the DVD picture with black bars on the
top and bottom.
• 4:3 panscan See a full-height picture with the sides trimmed.
• 16:9 Use with widescreen TVs. (frame ratio 16:9)
4 After you have connected the Antenna or Cable TV signal
to the Recorder’s ANTENNA IN jack, press OK.
5 Searching for TV Channels will appear.
Once the TV channel search is complete, the number of channels
found will appear.
6 Press SYSTEM MENU. The Recorder will turn off, then
on again.
The Recorder is ready for use!
2
3
1
Prepare the remote
control
Antenna or Cable TV signal
or coaxial cable from Cable Box
To Power Outlet
1
2
3
MRV700VR_QUG.fm 04.8.4, 10:56 AM 1