Magni Group HDTV - Manual (Page 12)

Connections & Setup
10 Chapter 1
Explanation of Jacks
This section describes the jacks you can use for connections. There are several ways to connect components to your TV.
Back Panel Jacks (in alphabetical order)
ANTENNA/CABLE ANALOG INPUT Lets you connect a coaxial cable to receive the signal
from the antenna, cable, cable box, or a VCR. This input jack is for analog signals only.
ANTENNA DIGITAL INPUT Lets you connect the coaxial cable from an off-air antenna to
receive the off-air digital signals.
Note: D .
AUDIO/VIDEO OUTPUT Lets you connect an amplifi er or audio receiver for improved
sound quality. You can also connect a VCR or external monitor to the FIXED outputs.
• V Provides a standard-defi nition video output from your TV. You can use this video V V
output along with the FIXED AUDIO L/R outputs to connect a VCR for recording
programs in standard defi nition from the analog antenna input. You can also connect
this output jack to an external monitor to watch standard defi nition programs.
Note: T V .
• FIXED AUDIO L/R Provides fi xed-level audio output from the TV. You can use IXED AUDIO L/R IXED AUDIO L/R
these audio outputs along with the video output to connect a VCR for recording. You
can also connect this audio output to an A/V receiver when you want to control the
volume through the A/V receiver.
• VARIABLE AUDIO Provides variable-level audio output. Volume levels are controlled
by the volume controls on the TV and remote control.
• SUBWOOFER Provides lower bass audio frequencies from the TV to a subwoofer.
Note: I ’ , E S
S . G 42 .
V L R
L R
FIXED AUDIO
AUDIO
SUBWOOFER
AUDIO/VIDEO OUTPUT
VARIABLE