Magni Group HDTV - Manual (Page 13)

Connections & Setup
Chapter 1 11
COMPONENT INPUTS Lets you connect a component video source, such as a DVD
player.
• CMP1 Y P
B
P
R
P P (Component Video)
R R
Provides optimum picture quality because the
video is separated into three signals. Use three video-grade cables for the connection.
When using CMP1 Y P
B
P
R
, make sure to connect left and right audio cables to the
CMP1 L and R Audio Input jacks.
• CMP1 L (Audio) Provides left audio connection. The left audio connector is usually
white.
• CMP1 R (Audio) Provides right audio connection. The right audio connector is usually
red.
• CMP2 Y P
B
P
R
, and L and R Audio Allows you to connect a second component video
source. Their description is the same as CMP1 above. When using CMP2 Y P
B
P
R
, make
sure you connect the left and right audio cables to the CMP2 Audio jacks.
COMPOSITE INPUTS Lets you connect another component such as a VCR or DVD player.
Its AUDIO jacks are the same as described for CMP1 above.
• VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2 Video)
because the color part of the picture is separated from the black and white part of the
picture. When using VID1 S-VIDEO, make sure to connect left and right audio cables to
the VID1 L/MONO and R Audio Input jacks.
• VID1 V (Video) Provides composite video connection. The video connector is usually
yellow.
• VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a component
such as a VCR or DVD player. Their description is the same as VID1 above.
Note: F VID (VID1 VID2), S-V
V . D VID .
DVI-HDTV Input Lets you connect a component with a DVI output. HDTV Input HDTV Input
Important: T DVI-HDTV .
• DVI (Digital Visual Interface) Provides an uncompressed, digital video interface
developed for high-bandwidth digital connection. It supports the overlay of high-
resolution graphics needed by some electronic program guide navigation and other
interactive services. DVI, when combined with HDCP (High bandwidth Digital
Content Protection) technology, creates a protected digital connection. The DVI-HDTV
connection is designed to display either progressive scan (480p) or HDTV (1080i)
signals at a bandwidth of up to 1.78 Gigabits per second.
• L (Audio) Provides left audio connection when using the DVI jack. The left audio
connector is usually white.
• R (Audio) Provides right audio connection when using the DVI jack. The right audio
connector is usually red.
Note: R DVI
, .
DVI-HDTV
R
L
P R
CMP1
COMPONENT
INPUT
Y
L
R
P B
VID1
VID2
COMPOSITE INPUTS
S-VIDEO V R L / MONO
V R L / MONO