Magni Group HDTV - Manual (Page 24)

22 Chapter 2
Using the Remote Control
The Buttons on the Remote Control
(0-9) Number Buttons Enter channel numbers and time settings directly through
the remote control.
To enter a one-digit channel, enter a zero fi rst. To enter a two-digit channel, press
the two digits. To enter a three-digit channel, press and hold the 1 button until 1
and two dashes (– –) appear, then add the second two digits. Example: to tune to
channel 123, press and hold 1 until 1– – appears, release the 1 button and then press
2 and 3.
ANT•CAB With the remote in TV mode, this button switches between your TV's
analog and digital tuners. In VCR mode (if programmed), functions as a TV/VCR
button. In SAT mode (if programmed), functions as a TV/SAT button for an RCA
satellite receiver.
Arrows Used to highlight different items in the TV menu and to adjust the menu
controls.
AUDIO Places the remote in audio mode to operate a component (such as a audio
receiver or amplifi er receiver) that you’ve programmed to work with this button. This
button lights when you press a valid button in AUDIO mode (see Modes of Operation
on page 26 for more details).
AUX•HD Places the remote in auxiliary mode to operate a component (such as a
cable box, satellite receiver, VCR, DVD, or audio receiver) that you’ve programmed
to work with this button. AUX by default is set up for an RCA HDTV Tuner receiver.
This button lights when you press a valid button in AUX•HD mode (see Modes of
Operation on page 26 for more details).
BACKLIGHT Press to illuminate some of the remote control’s buttons. To conserve
battery power, the light turns off after several seconds. Backlight won’t activate if
batteries are low, but blinks on and off quickly.
CC Displays a reduced Closed Captioning menu, allowing you to turn closed
captioning on and off or change the closed captioning mode. Use the up and down
arrow buttons to highlight the setting you want to change. Use the left and right
arrow buttons to change the highlighted setting.
CH + or CH - Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels.
In DVD mode (if programmed), these buttons work as chapter advance or chapter
reverse buttons with some DVD players.
CLEAR Removes any menu or display from the screen and returns you to normal
CLEAR CLEAR
viewing.
DVD Puts the remote in DVD mode and, if Autotuning is enabled, will turn on the
TV and tune to the correct input channel. This button lights when you press a valid
button in DVD mode (see Modes of Operation on page 26 for more details).
FORMAT Changes the current format (aspect ratio and magnifi cation) of the image
on the screen. Format control is not available for digital 16:9 broadcasts.
FREEZE When watching TV, freezes the picture until you press any button on
the remote to resume normal TV viewing. The FREEZE feature automatically times
out after a short time. Please note that when you "unfreeze" you go back to live
programming (skipping any programming that occurred during the freeze).
Note: T FREEZE DVI-HDTV, CMP1,
CMP2 (480 ) HDTV (1080 ) . I
.
D F . T
. S
. P .
STOP PAUSE PP
TV ON•OFF
AUX•HD