Magni Group HDTV - Manual (Page 26)

24 Chapter 2
Using the Remote Control
Programming the Remote to Operate
Other Components
The universal remote can be programmed to operate many brands of remote-
controllable VCRs, audio components, DVD players, cable boxes, satellite
receivers and other components. In addition to being programmed to operate
your television, it’s already programmed to operate most RCA components.
The AUX•HD button can be programmed to operate most brands of an
additional remote-controllable component: satellite receiver, cable box,
DVD, VCR, and an audio component. A second and third RCA TV can be
programmed to any component button, except the TV button.
Note: T TV ’
; TV.
Find Out If You Need to Program the Remote
To determine whether the universal remote needs to be programmed to operate
one of the components connected to your TV, such as a DVD player, do the
following:
1. Turn on the component (in this example, a DVD player).
2. Point the remote at the component.
3. Press the corresponding component button (in this example, DVD).
4. Press ON•OFF to see if the DVD player responds. If the DVD player
doesn’t respond, you need to program the remote to operate it.
Programming the Remote
There are two ways to program the remote control to operate other
components: Automatic Code Search and Direct Entry.
Using Automatic Code Search
Note: T AUX HD VCR ,
-VCR . B ,
AUX HD RCA HDTV T .
The following instructions can be used to program the remote to operate each
of your components. If you want to stop the automatic code search without
programming any of your components, press the CLEAR button until the
component button you’re trying to program turns off.
1. Turn on the component you want to control (VCR, satellite receiver, etc.)
2. Press and hold the button you want to program. While holding the
component button, press and hold ON•OFF until all of the component
buttons (VCR, TV, DVD, AUDIO, AUX•HD, and SAT•CABLE) fl ash. Then,
release both buttons.
3. Point the remote at the component, press and release PLAY, then wait fi ve
seconds or until the component button you’re trying to program stops
fl ashing.
Y ’
A C S .
I : T
. I
.
T
T
,
CLEAR
.
STOP PAUSE PP
TV ON•OFF
AUX•HD DVD SAT•CABLE SA SA
CC PRESETS FREEZE SOUND
PLAY PLA PLA FORWARD W W REVERSE
GUIDE
GO BACK
CH +
CH -
VO
L VO
L
FORMAT FORMA FORMA MUTE
INFO
MENU CLEAR
SKIP
ANT•CAB
1 3
4 6
7 8 9
0
INPUT
VCR
AUDIO
OK OK
RECORD
BACKLIGHT
GUIDE
GO BACK
CH +
CH -
VO
L VO
L
FORMAT MUTE