Magni Group HDTV - Manual (Page 25)

Chapter 2 23
Using the Remote Control
GO BACK Returns you to the previous channel. GO BACK GO BACK
GUIDE Brings up the Channel Guide menu.
Channel Guide Channel Guide
INFO Brings up the Channel Banner with channel and viewing information. Press
again to remove the banner.
INPUT Press to toggle through the available input sources (VID1, VID2, FRNT,
CMP1, CMP2 and DVI). Press the CH+ or CH- button to resume TV viewing.
MENU Brings up the Main menu.
MENU MENU
Note: I TV,
( 25 ). W ,
.
T .
MUTE Reduces the TV’s volume to its minimum level. Press again to restore the
volume. To program this button to work with an audio component, follow the
instructions in the Volume Punchthrough Feature section on page 26.
Volume Punchthrough Feature Volume Punchthrough Feature
OK When in the menu system, selects highlighted items. When watching TV,
freezes the picture until you press any button on the remote to resume normal TV
viewing. Please note that when you "unfreeze" you go back to live programming
(skipping any programming that occurred during the freeze).
ON•OFF When in TV mode, turns the TV on and off. If in another component
mode (VCR, DVD, AUDIO, SAT•CABLE, or AUX•HD) and programmed, will turn
the component on and off. When pressed twice within two seconds, the ON•OFF
button turns off most RCA components.
PRESETS Displays the Picture and Sound preset settings. Use the up and down
arrow buttons to highlight either Picture or Sound settings. Use the left and right
arrow buttons to change to a different Picture or Sound preset.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides
transport control for some remote-controllable VCRs and DVD players.
SAT•CABLE (Satellite•Cable) Places the remote in SAT/CABLE box mode.
If Auto Tuning is enabled, turns on the TV and tunes it to the satellite or cable
box Video Input Channel. This button lights when you press a valid button in
SAT•CABLE mode (see Modes of Operation on page 26 for more details).
SKIP In TV mode, activates the commercial skip timer. This button also activates
the search function on some RCA, GE, or ProScan VCRs (when the remote is in
VCR mode).
SOUND On digital channels/inputs, toggles through the audio modes (if available
for that channel). For analog channels, toggles SAP on or off. If you change
channels/inputs, the default for Audio Mode or SAP is restored. Does not affect
default menu settings for SAP or
SAP SAP Audio Mode.
TV Places the remote in TV mode. Turns on the TV and tunes to the last-viewed
TV channel or input. This button lights when you press a valid button in TV mode
(see Modes of Operation on page 26 for more details).
VCR Places the remote in VCR mode. If Auto Tuning is enabled, turns on the TV
and tunes to the VCR Video Input Channel. This button lights when you press a
valid button in VCR mode (see Modes of Operation on page 26 for more details).
VOL – or VOL + Decreases or increases the TV’s volume. To program this
button to work with an audio component, follow the instructions in the Volume
Punchthrough Feature section on page 26.
Punchthrough Feature Punchthrough Feature
N :
T DVD, VCR, AUDIO, SAT CABLE,
AUX HD RCA
.
T
T RCA
TV, ON OFF
.
T RCA .
T
T
’
.
A
.