Motorola HC12 - Manual (Page 165)

Assembler Directives
ABSENTRY — Application Entry Point
MCUez HC12 Assembler User’s Manual
MOTOROLA Assembler Directives 165
8.3 ABSENTRY — Application Entry Point
Syntax: ABSENTRY <label>
Description: This directive specifies the application entry point in a directly
generated absolute file (the option -FA2 ELF/DWARF 2.0
absolute file must be enabled).
Using this directive, the entry point is written in the ELF header
of the generated absolute file. When this file is loaded in the
debugger, the line where the entry point label is defined is
highlighted in the source window.
Example: If the next example is assembled using the -FA2 option, an
ELF/DWARF 2.0 absolute file is generated.
ABSENTRY entry
ORG $fffe
Reset: DC.W entry
ORG $70
entry: NOP
NOP
main:
NOP
BRA main