Motorola HC12 - Manual (Page 224)

User’s Manual MCUez HC12 Assembler
224 Operating Procedures MOTOROLA
Operating Procedures
11.4 Initializing the Vector Table
The vector table is initialized in the assembly source file or in the linker
parameter file. Initializing it in the PRM file is recommended.
11.4.1 Initializing the Vector Table in the Linker PRM File
Initializing the vector table from the PRM (parameter) file allows initialization
of single entries in the table. The user can decide to initialize all the entries in
the vector table or not.
The labels or functions inserted in the vector table must also be implemented in
the assembly source file. All these labels must be published; otherwise, they
cannot be addressed in the linker PRM file.
Example:
XDEF IRQFunc, XIRQFunc, SWIFunc, OpCodeFunc, ResetFunc
DataSec: SECTION
Data:DS.W 5 ; Each interrupt increments an element in the table
CodeSec: SECTION
; Implementation of the interrupt functions
IRQFunc:
LDAB #0
BRA int
XIRQFunc:
LDAB #2
BRA int
SWIFunc:
LDAB #4
BRA int
OpCodeFunc:
LDAB #6
BRA int
ResetFunc:
LDAB #8
BRA entry
int:
LDX #Data ; Load address of symbol Data in X
ABX ; X <- address of appropriate element in the table
INC 0, X ; The table element is incremented
RTI
entry:
LDS #$AFE
loop: BRA loop