Motorola AP-51XX - Manual (Page 273)

Configuring Access Point Security 6-55
5. Click Apply to save any changes to the Content Filtering screen. Navigating away from the
screen without clicking the Apply button results in all changes to the screens being lost.
6. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Content Filtering screen to the last saved configuration.
7. Click Logout to securely exit the Access Point applet. A prompt displays confirming the
logout before the applet is closed.
6.13 Configuring Rogue AP Detection
It is possible that not all of the devices identified by the access point are operating legitimately within
the access point’s radio coverage area. A rogue AP is a device located nearby an authorized Motorola
access point but recognized as having properties rendering its operation illegal and threatening to the
access point and the LAN. Rogue AP detection can be configured independently for both access point
802.11a and 802.11b/g radios (if using a dual radio sku access point). A rogue detection interval is
the user-defined interval the access point waits to search for rogue APs. Additionally, the access
point does not detect rogue APs on illegal channels (channels not allowed by the regulatory
requirements of the country the access point is operating in).
Block Outbound FTP
Actions File Transfer Protocol (FTP) is the Internet standard for host-to-host
mail transport. FTP generally operates over TCP port 20 and 21. FTP
filtering allows the blocking of any or all outgoing FTP functions.
Check the box next to the command to disable the command when
using FTP across the
access point ’s WAN port.
• Storing Files - Blocks the request to transfer files sent from
the client across the AP’s WAN port to the FTP server.
• Retrieving Files - Blocks the request to retrieve files sent
from the FTP server across the AP’s WAN port to the client.
• Directory List - Blocks requests to retrieve a directory listing
sent from the client across the AP’s WAN port to the FTP
server.
• Create Directory - Blocks requests to create directories sent
from the client across the AP’s WAN port to the FTP server.
• Change Directory - Blocks requests to change directories
sent from the client across the AP's WAN port to the FTP
server.
• Passive Operation - Blocks passive mode FTP requests sent
from the client across the AP's WAN port to the FTP server.