Motorola AP-51XX - Manual (Page 91)

Getting Started 3-15
4. Click the Ping button to begin transmitting packets to the specified MU address.
Refer to the Number of Responses value to assess the number of responses from the MU
versus the number of ping packets transmitted by the access point. Use the ratio of packets
sent versus the number of packets received the link quality between the MU and the access
point.
Click the OK button to exit the Echo Test screen and return to the MU Stats Summary screen.
3.5.3 Where to Go from Here?
Once basic connectivity has been verified, the access point can be fully configured to meet the needs
of the network and the users it supports. Refer to the following:
• For detailed information on access point device access, SNMP settings, network time,
importing/exporting device configurations and device firmware updates, see
Chapter 4,
System Configuration on page 4-1 .
• For detailed information on configuring access point LAN interface (subnet) and WAN
interface see,
Chapter 5, Network Management on page 5-1 .
• For detailed information on configuring specific encryption and authentication security
schemes for individual access point WLANs, see
Chapter 6, Configuring Access Point
Security on page 6-1 .
• To view detailed statistics on the access point and its associated MUs, see Chapter 7,
Monitoring Statistics on page 7-1 .
Packet Length Specifies the length of each packet transmitted to the MU during
the test. The default length is 100 bytes.